Shocking Electric Solutions, Inc. wires backup power for Sharpsburg, GA homes: generator power inlets with listed interlock kits, manual transfer switches, and automatic transfer switches for whole-home standby generators. We are a Georgia licensed electrical contractor (license EN216120, Class II Unrestricted) based at 1002 Highway 16 W, Suite A, in Newnan, a short drive from Sharpsburg, and we have served Coweta County homeowners since 2008. Estimates are free, and our installations carry a 2-year warranty.
Need an electrician in Sharpsburg? Call or text a licensed local electrician.
Free estimates · GA License EN216120 · Mon–Fri 8–5
Why Sharpsburg Homeowners Plan for Outages
Sharpsburg is a small town in eastern Coweta County, and the Sharpsburg mailing address covers a much wider area of unincorporated Coweta, including the busy area around Thomas Crossroads and many subdivisions and rural properties between Newnan, Senoia and Peachtree City. Lots with mature trees and longer stretches of overhead line are common, and that is a recipe for outages when summer storms or ice roll through.
Rural and large-lot homes add another concern: many properties out here rely on a private well. When the power goes out, the well pump stops and so does the water. That makes backup power about more than keeping the freezer cold. It is about running water, the furnace fan or heat pump, a sump pump and the essentials that keep a household going.
Portable Generator Hookups
A portable generator can carry a lot of a household if it is connected correctly. Never plug a generator into a dryer or wall outlet with a double-ended cord. That backfeeds the utility lines, endangers line workers and neighbors, and can overheat the wiring in your home. We install the safe options:
- Power inlet with a listed interlock kit made for your exact panel, so the main breaker and the generator breaker can never be on together.
- Power inlet with a manual transfer switch wired to the circuits you choose, such as the refrigerator, furnace fan, lights, outlets and the house-side well pump circuit.
- An inlet location that makes sense, close to where the generator can safely run outdoors, away from doors, windows and vents.
Whole-Home Standby Generators
A standby generator runs on natural gas or propane, which suits Sharpsburg properties that already use a propane tank. When an automatic transfer switch senses that utility power is gone, the generator starts on its own and restores power within seconds, even if you are away from home. We size the transfer switch, add load management for large appliances such as air conditioners and electric ranges, run the wiring between the generator and the switch, and make the connection at your panel. We work with the generator brand you choose, and a licensed gas contractor handles the fuel line. We coordinate the schedule with them.
Sharpsburg Details We Plan For
- Town or county: homes inside the Town of Sharpsburg and homes in unincorporated Coweta County with a Sharpsburg address can fall under different permitting offices. We confirm which one applies and handle the permit and inspection.
- Well pumps: well pump motors draw a big surge when they start. We account for that when sizing the generator connection and choosing which circuits to include. Our work is on the house side of the well system.
- Panel condition: older or full panels may not accept an interlock. If that is the case, we may recommend a panel upgrade first. See our electrical panel upgrades page.
- Detached garages and shops: if a shop or barn needs backup power too, we plan that into the transfer setup.
- HOA rules: some Sharpsburg-area subdivisions review outdoor equipment. Check before a standby unit goes in.
How the Installation Works
- Free estimate to look at your panel, service size and the loads you want covered.
- Written plan for the inlet, interlock or transfer switch, wire sizes and locations.
- Permit and inspection through the correct office for your address.
- Installation, usually part of a day for inlet and interlock work, longer for standby generators.
- Testing and a walkthrough of the safe start-up and shut-down order.
Frequently Asked Questions
Can a generator run my well pump?
Yes, if the generator is sized for the pump’s starting surge. We include the house-side well pump circuit in the transfer switch or standby plan.
Interlock kit or transfer switch: which is better?
An interlock is simple and lets you choose any circuit in the panel. A manual transfer switch limits you to pre-selected circuits but makes switching straightforward. We recommend one based on your panel and how you want to use it.
Can I run my generator on propane?
Many standby generators run on propane, and some portable generators are dual-fuel. A licensed gas contractor handles the fuel connection; we handle the electrical side.
Do you sell a specific generator brand?
No. We are electrical contractors, not a brand dealer. We install the electrical connection for the generator you choose.
How long does an inlet and interlock installation take?
Most are completed in part of a day once the permit is in place.
Related Pages
- Generator installation and transfer switches in Newnan, GA
- Electrician in Sharpsburg, GA
- EV charger installation in Sharpsburg
- Well pump wiring and circuit repair
- Whole-home surge protection
If your panel is full or too old for an interlock, see our page on electrical panel upgrades in Sharpsburg.
Get Your Sharpsburg Home Ready for the Next Outage
Call (678) 552-9399, text (470) 516-7261, email info@shockingelectricsolutions.com, or book online. Office hours are Monday through Friday, 8 AM to 5 PM, at 1002 Highway 16 W, Suite A, Newnan, GA 30263. Same-day and next-day appointments are often available, and electrical emergencies can happen anytime, so call us. Google reviewers rate us 4.9 stars from 150 reviews. Done Right The First Time.