Outlet Repair, Replacement & GFCI Services in Newnan, GA

Outlets get used every day, so small problems are easy to ignore until one stops working, feels warm, sparks or trips over and over. Those are signs of a loose connection, a worn-out device, an overloaded circuit or missing protection, and they are worth fixing before they damage your electronics or become a fire or shock hazard.

Shocking Electric Solutions, Inc. is a locally owned, licensed electrical contractor based at 1002 Highway 16 W, Suite A in Newnan. We repair, replace and upgrade outlets and GFCI protection for homeowners in Newnan, Coweta County and nearby communities. Want a free estimate? Book online, call (678) 552-9399, or text (470) 516-7261.

Outlet and GFCI Services We Provide

• Outlet repair and replacement: dead, loose, cracked, scorched or worn-out outlets
• GFCI protection: new GFCI outlets and breakers, and GFCIs that keep tripping or will not reset
• AFCI protection: arc-fault breakers and outlets that help prevent wiring fires
• Two-prong upgrades: grounded or GFCI-protected replacements for older outlets
• Specialty outlets: tamper-resistant, USB and USB-C, 20-amp, and weather-resistant outdoor outlets
• Troubleshooting: outlets that stop working, spark, feel warm or smell like burning

Need a new outlet where there isn’t one, a relocated receptacle or a dedicated circuit? See new receptacles and wiring in Newnan, GA.

Outlet Repair and Replacement

Outlets wear out. After years of plugging and unplugging, the contacts inside lose their grip, so plugs fall out or connect poorly. Faceplates crack, and loose or back-stabbed wire connections heat up over time. A loose plug, black marks around the slots, a crackling sound or a faceplate that feels warm all mean the outlet should be replaced.

When we replace an outlet, we don’t just swap the face. We check the wire connections, the box, polarity and grounding, then install a device rated for the location and test it. If a nearby outlet on the same circuit shows the same wear, we let you know.

Outlet Problems We Repair in Newnan Homes

Most outlet repair calls start with one symptom. Each of these guides explains the causes and what we check, and this page is where to book outlet repair or replacement in Newnan:

• Outlet not working and outlet stopped working but the breaker did not trip
• How to tell if an outlet is dead, safely
• Sparking outlet repair and is a sparking outlet dangerous?
• Outlet hot when something is plugged in and are warm outlets dangerous?
• Burning smell from an outlet
• Upgrading two-prong outlets
• When to replace outlets and light switches
• Adding new outlets and circuits
• Overloaded power strips and not enough outlets

Outlet repair is not a DIY job when the outlet is hot, sparking, scorched or dead for no clear reason. Those are signs of a loose connection or wiring problem behind the wall, and a licensed electrician should find the cause.

What GFCI Protection Does

A ground-fault circuit interrupter (GFCI) watches the current going out and coming back on a circuit. If even a small amount leaks to ground, for example through water or a person, it cuts the power in a fraction of a second. That is why GFCI protection matters wherever water and electricity can meet.

Current code calls for GFCI protection in bathrooms, kitchens, laundry areas, garages, outdoor outlets, crawl spaces and unfinished basements, and near sinks. Many older homes were built before some of these requirements, so we check each area and add GFCI outlets or GFCI breakers where protection is missing.

GFCI outlets that keep tripping or will not reset

A GFCI that trips now and then may simply be doing its job. Repeated trips usually point to moisture in an outdoor or bathroom outlet, a faulty appliance, damaged wiring, or a GFCI near the end of its life. A GFCI that will not reset may have no power, may be worn out, or may have its line and load wires reversed. For causes and fixes, see why a GFCI outlet keeps tripping and GFCI outlet not resetting. Hot tubs, spas and pool equipment also need GFCI protection; see hot tub and pool electrical wiring.

Line and load wiring

A GFCI has two sets of terminals. The line side connects to the incoming power, and the load side feeds other outlets downstream so one GFCI can protect several. When they are wired correctly, a tripped GFCI shuts off power to those downstream outlets too, which is why a single tripped GFCI in a garage or bathroom can leave other outlets dead. When line and load are reversed, newer GFCIs will not reset and older ones may not protect anything. We confirm the wiring and test every protected outlet.

AFCI, Tamper-Resistant, USB and 20-Amp Outlets

• AFCI protection: an arc-fault circuit interrupter detects the dangerous arcing that comes from damaged cords, loose connections or a nail through a wire, and shuts off the circuit before it can start a fire. Code calls for AFCI protection on many living-area circuits, and dual-function breakers combine AFCI and GFCI protection.
• Tamper-resistant outlets: built-in shutters keep children from pushing keys or other objects into the slots. They are required for new and replacement outlets in homes and are an easy upgrade in nurseries and playrooms.
• USB and USB-C outlets: charge phones and tablets without bulky adapters in kitchens, bedrooms and home offices.
• 20-amp outlets: for kitchen countertops, garages and workshops, installed only on circuits wired and protected for 20 amps.

Upgrading Two-Prong Outlets

Many older homes still have two-prong outlets with no ground. Swapping in a three-prong outlet without a ground is unsafe and misleading. The best fix is to run a ground wire to the outlet. Where that is not practical, code allows a GFCI outlet labeled “No Equipment Ground” as the replacement. It adds shock protection, but it does not provide a true ground for surge protectors or electronics. We’ll explain the options for your home.

Outdoor, Garage and Workshop Outlets

Outdoor outlets need GFCI protection, weather-resistant devices and in-use covers that stay closed while something is plugged in. Garages and workshops need outlets placed where you work, on circuits sized for tools, freezers and chargers, without depending on extension cords.

When an Outlet Points to a Bigger Problem

Sometimes a bad outlet is just a bad outlet. But outlets that lose power in several rooms, spark when you plug something in, feel warm or smell like burning can point to loose wiring, an overloaded circuit or a panel problem. Turn off the breaker for a hot or burning outlet and call us. See outlet not working, outlet sparks when plugging in, burning smell from outlet, or our electrical troubleshooting service.

How We Handle Outlet and GFCI Work

1. Listen: we go over what you are seeing and which outlets are affected.
2. Test: we check the outlets, GFCI and AFCI devices, wiring, polarity, grounding and the circuit.
3. Repair: we replace devices, tighten or repair connections, and add protection where it is needed.
4. Verify: we test every outlet we worked on, including GFCI trip and reset, and explain what we found.

Permits and Utilities in Newnan and Coweta County

Simple like-for-like outlet replacements usually don’t need a permit, but new circuits and new wiring can. Inside Newnan city limits, permits and inspections go through the City of Newnan Building Department. In unincorporated Coweta County, they go through Coweta County Building Permits and Inspections. Depending on your address, your power comes from Georgia Power, Newnan Utilities or Coweta-Fayette EMC. We pull the permits our work requires.

Why Choose Shocking Electric Solutions

• Licensed Georgia electrical contractor, GA License EN216120
• Locally owned, serving Newnan and nearby communities since 2008
• 2-year workmanship warranty
• Free estimates
• Rated 4.9 stars on Google
• Every outlet tested before we leave

Same-day and next-day appointments often available. Call or text and we’ll get you scheduled fast.

Related Electrical Services

• All Residential Electrical Services
• New Receptacles & Wiring
• Electrical Troubleshooting & Repairs
• Electrical Panel Upgrades
• Lighting Installation
• Ceiling Fan Installation

Outlet and GFCI Services in Nearby Areas

We serve Newnan and all of Coweta County, including East Newnan, Senoia, Sharpsburg, Moreland, Grantville, Turin and Haralson, and communities within about 40 miles such as Peachtree City, Tyrone, Fayetteville, Carrollton, Riverdale and south Atlanta.

• Outlet & GFCI services in Peachtree City, GA
• Electrician in Sharpsburg, GA
• Outlet not working

View Full Service Areas

Outlet & GFCI FAQ

Why does my GFCI outlet keep tripping?

A GFCI trips when it senses current leaking where it should not, often from moisture in an outdoor or bathroom outlet, a faulty appliance, or damaged wiring downstream. It can also be a worn-out device. We test the GFCI, the outlets it protects and the connected loads to find the real cause.

Why won’t my GFCI outlet reset?

Common reasons are that the circuit has no power (check the breaker), the device has reached the end of its life, the line and load wires are reversed, or a ground fault is still present on the circuit. A licensed electrician can test it safely and replace or rewire it.

Where are GFCI outlets required?

Current code calls for GFCI protection in bathrooms, kitchens, laundry areas, garages, outdoors, crawl spaces and unfinished basements, and near sinks. We check your home and add protection where it is missing.

Can you replace two-prong outlets with three-prong outlets?

Yes. The best fix is to add a ground wire. Where that is not practical, code allows a GFCI outlet labeled “No Equipment Ground” to replace a two-prong outlet. It adds shock protection, but it does not provide a true ground for surge protectors or electronics.

What is the difference between a GFCI and an AFCI?

A GFCI protects people from electric shock by cutting power when current leaks to ground. An AFCI protects against fire by detecting dangerous arcing in damaged wires or loose connections. Many homes need both, and dual-function devices provide both.

Do you install USB, tamper-resistant and 20-amp outlets?

Yes. We install USB and USB-C combination outlets, tamper-resistant outlets that keep children from inserting objects, and 20-amp outlets on circuits sized for kitchens, garages and workshops.

How much does outlet or GFCI work cost?

It depends on the number and type of outlets, whether new wiring or a new circuit is needed, and the condition of the existing wiring. We give every homeowner a free estimate before any work begins.

Schedule Outlet or GFCI Service

Book a free estimate online

Contact Shocking Electric Solutions

For more home electrical safety tips, see the CPSC home electrical safety guide.