Shocking Electric Solutions, Inc. upgrades and replaces electrical panels for homeowners in Palmetto, GA. We are a Georgia licensed electrical contractor (license EN216120, Class II Unrestricted), IBEW Local 613 trained, and we have served Coweta and south Fulton County homes since 2008 from our office at 1002 Highway 16 W, Suite A, in Newnan. Estimates are free, our work carries a 2-year warranty, and same-day and next-day appointments are often available.

Need an electrician in Palmetto? Call or text a licensed local electrician.

Call (678) 552-9399 Text (470) 516-7261

Free estimates · GA License EN216120 · Mon–Fri 8–5

New Leviton breaker panel installed by Shocking Electric Solutions — A new breaker panel with room for today’s loads and tomorrow’s additions.

Palmetto Homes and the Panels Inside Them

Palmetto is a small city that sits mostly in south Fulton County, with part of it reaching into Coweta County. Its historic downtown grew up along the railroad and US 29, and the streets around it still have older homes built long before central air, home offices and electric vehicles were part of daily life. Farther out, subdivisions from the last few decades and newer construction fill in the land between downtown, I-85 and the Coweta County line.

That range of ages shows up in the electrical panel. In older Palmetto houses we may find a fuse box, a small service, or an early breaker panel that has been added onto so many times there is no space left. In homes from the 1980s through the 2000s, the panel is often still serviceable but full, packed with tandem breakers to make room for the circuits added since. And in newer homes, the question is usually capacity: can the panel carry an EV charger, a hot tub, a shop or a generator connection without overloading the service?

Signs Your Palmetto Home May Need a Panel Upgrade

Breakers that trip often under normal use
No open spaces for new circuits, or many tandem breakers
A fuse box or an obsolete panel brand an insurer has asked about
Rust, scorch marks, buzzing or heat at the panel
Lights that dim when the HVAC or a large appliance starts
Plans for an EV charger, hot tub, workshop, addition or generator

If you notice burning smells, buzzing or scorch marks at the panel, do not open it. Turn off what you safely can and call us so a licensed electrician can check it. Our page on a buzzing electrical panel explains what those warning signs can mean.

We Start With a Load Calculation

A bigger panel is not automatically the answer. Before we recommend anything, we do a load calculation that accounts for your home’s size, heating and cooling equipment, water heater, range, dryer and the projects you have planned. Sometimes the service you have is enough and the panel only needs to be replaced or reorganized. Sometimes the service itself needs to increase, which can mean a new meter base and service entrance as well. You see the reasoning in writing before you decide.

What a Panel Upgrade Involves

Free estimate with a load calculation and a written recommendation
Permit filed with the right office for your address
Utility coordination for the disconnect and reconnect
Panel replacement with every circuit clearly labeled
Grounding and bonding checked and corrected
Inspection, then power restored and a walkthrough of the new panel

Permits and Utilities in Palmetto

Because Palmetto crosses a county line, the permitting office depends on where your home sits. Addresses inside city limits go through the City of Palmetto, while homes outside the city fall under Fulton County or Coweta County. We confirm the correct office for your parcel, file the permit and meet the inspector. Your utility has to disconnect and reconnect service for a panel change, and we schedule that with them so the time your power is off is as short as practical.

Plan Ahead While the Panel Is Open

A panel upgrade is the best time to prepare for what is next. Many homeowners add whole-home surge protection at the panel, leave space for a future EV charger, or set the panel up for a generator interlock or transfer switch. If backup power is on your list, see our page on generator installation and transfer switches in Palmetto. We plan the new layout so those additions fit without starting over.

Why Panel Condition Matters

Breakers must trip reliably under overload, bus bars must make solid contact, and grounding and bonding must be right for the whole system to be safe. Moisture, corrosion and loose connections can quietly degrade a panel, especially one in a garage, utility room or on an exterior wall exposed to Georgia humidity. During the upgrade we replace worn parts and fix the grounding and bonding problems we find.

Frequently Asked Questions

How long will my power be off?

Most panel replacements are completed in a single day, depending on utility scheduling and inspection.

Do I need a 200-amp service?

Not always. The load calculation tells us whether your current service is enough or whether a service upgrade makes sense.

Can you replace a fuse box?

Yes. We replace fuse boxes with modern breaker panels. See our fuse box replacement page.

Can you add circuits without a new panel?

If the panel has open spaces and the service has capacity, yes. If it is full or overloaded, an upgrade or subpanel may be the safer route.

Is the work guaranteed?

Yes. Our installations carry a 2-year warranty, and estimates are free.

Schedule a Panel Upgrade in Palmetto

Call (678) 552-9399, text (470) 516-7261, email info@shockingelectricsolutions.com, or book online. Office hours are Monday through Friday, 8 AM to 5 PM, at 1002 Highway 16 W, Suite A, Newnan, GA 30263. Same-day and next-day appointments are often available, and electrical emergencies can happen anytime, so call us. Google reviewers rate us 4.9 stars from 150 reviews. Done Right The First Time.

Electrical Panel Upgrade in Palmetto, GA