Electrical problem at home? Talk to a licensed Newnan electrician.
Free estimates · GA License EN216120 · Mon–Fri 8–5
1. Your Home Still Has Knob-and-Tube or Cloth-Insulated Wiring
Knob-and-tube wiring and early cloth-insulated cable were common in homes built before the 1950s. There are plenty of older homes in and around downtown Newnan, and some still have original wiring hidden in walls and attics. This wiring has no ground conductor, its insulation becomes brittle with age, and it was never designed to be buried in modern insulation. If you see porcelain knobs in the attic or crawlspace, or wiring with fabric-style insulation, have it evaluated.2. Mostly Two-Prong, Ungrounded Outlets
Two-prong outlets usually mean the circuit has no equipment ground. That limits surge protection and the safety features built into many appliances and electronics. Swapping in a three-prong outlet without a ground does not fix the problem. In some cases GFCI protection is an acceptable code-compliant option, but if most of the house is ungrounded, rewiring is often the more complete and long-term answer.3. Aluminum Branch Wiring
Some homes built from the mid-1960s to the mid-1970s used aluminum branch-circuit wiring. Aluminum expands and contracts more than copper, which can loosen connections at outlets and switches over time and cause overheating. There are approved repair methods for some situations, so this is a case where a professional inspection matters before deciding between repairs and a rewire.4. Warm Outlets, Burning Smells, or Scorch Marks
Outlets or switch plates that feel warm, look discolored, crackle, or give off a burning smell are warning signs of loose connections or damaged wiring. Stop using that outlet and have it checked right away. One bad device may be a simple fix, but if we find the same damage in several places, it points to a larger wiring problem. Our electrical troubleshooting service in Newnan is the right first step to find out which it is.5. Breakers That Trip Often and Lights That Flicker
A breaker that trips now and then is doing its job. Breakers that trip regularly, or lights that dim when the microwave or AC starts, usually mean circuits are overloaded or connections are failing. Sometimes the answer is a few added circuits or a panel upgrade. When the wiring behind those circuits is also old or undersized, a rewire and panel upgrade are often done together.6. You Are Planning a Major Remodel or Addition
Kitchen remodels, finished basements, additions, EV chargers, and new HVAC equipment all add electrical load. When walls are already open, it is the easiest and most cost-effective time to replace outdated wiring and bring the work up to current code.7. An Inspector or Insurance Company Flagged the Wiring
Home inspectors often note knob-and-tube, aluminum branch wiring, ungrounded circuits, or amateur wiring during a sale. Some insurance companies also ask about the age and type of a home’s wiring. If a report flagged your electrical system, we can review it with you and explain which items are urgent and which can wait.What a Rewire Involves
A whole-home rewire replaces old branch wiring with new grounded copper wiring, adds new boxes and devices where needed, and brings outlets, GFCI and AFCI protection, and circuits up to current code. We plan the work to limit wall openings, pull the required permits, and walk you through each step. You can read more about the process on our complete home rewire page for Newnan, GA.Partial Rewire vs. Full Rewire
Not every older home needs a full rewire. If only certain circuits are original, we can replace those in stages. A full rewire makes more sense when most of the wiring is old, when you are remodeling, or when an insurer requires it. See knob-and-tube wiring and insurance and fuse box replacement.
Rewiring Older Homes in Newnan’s Historic Neighborhoods
Newnan has several historic districts listed on the National Register of Historic Places, and the houses in them were built long before modern wiring, or before electricity at all. Each one tends to show its own wiring story:
- College-Temple (Northwest Newnan Residential Historic District): laid out in 1828, with homes from many eras. Houses that predate electric service had wiring added later, often several generations of it, so we may find knob-and-tube, cloth-covered cable and newer circuits spliced together in the same attic.
- Greenville Street–LaGrange Street: houses from the late antebellum period through the early twentieth century, mostly wood-framed and weatherboarded, ranging from Greek Revival and Queen Anne to Craftsman and Tudor Revival. Plaster walls and original trim mean wire routes have to be planned carefully.
- Cole Town: a neighborhood that grew up around the R.D. Cole Company, founded in 1854, whose architectural woodwork shows up throughout the district. Protecting that millwork is part of planning any rewire there.
- Newnan Cotton Mill and Mill Village: the mill opened in 1888, and the surrounding mill houses date mostly to the early twentieth century. These compact homes were built with very few circuits and have often been rewired piece by piece over the decades.
In homes like these, we plan wire routes through attics, crawlspaces, closets and existing chases to keep wall openings to a minimum and protect original plaster and trim. We also check the panel and service, since a house that has outgrown its wiring has often outgrown its panel too.
A National Register listing alone does not restrict what you do inside your house. But for properties the City of Newnan has designated as locally historic, a material change to the front of the building facing a public street needs a Certificate of Appropriateness from the city’s Historic Resource Commission before a building permit can be issued. Interior rewiring is not reviewed, but moving a meter or service mast, or adding fixtures on the front of the house, can be. We help you sort out what applies before the work is scheduled, and we pull the electrical permit with the City of Newnan, or with Coweta County if you live outside city limits.
If your older home also has breakers that trip often or will not reset, see circuit breaker repair and replacement in Newnan, GA.
Related Reading
More guides from our Newnan electricians on this topic:
Frequently Asked Questions
Do I have to move out during a rewire?
Usually not. Most homeowners stay, and we restore power to finished areas each day when possible.
How long does a rewire take?
It depends on the size of the home and access. We give you a schedule with your estimate.
Will rewiring damage my walls?
Some openings are needed. We plan routes through the attic and crawlspace to keep them to a minimum.
Is a permit required for rewiring?
Yes. We pull the permit and schedule the inspection.
Do historic district rules in Newnan affect a rewire?
Interior rewiring is not reviewed. For properties the City of Newnan has designated as locally historic, exterior changes to the street-facing front of the house, such as moving the meter or service mast, can need a Certificate of Appropriateness before a permit is issued. We help you check before work starts.
Get Your Wiring Checked in Newnan
Many of these signs show up in older homes around downtown Senoia, too. Learn more about working with an electrician in Senoia.
Not sure whether you need a full rewire or just a few repairs? Call Shocking Electric Solutions, Inc. at (678) 552-9399 or text (470) 516-7261 to schedule an evaluation. We are based at 1002 Highway 16 W, Suite A, Newnan, GA 30263, and serve Newnan and communities within about 40 miles, including Tyrone and Peachtree City.