Electrical problem at home? Talk to a licensed Newnan electrician.

Free estimates · GA License EN216120 · Mon–Fri 8–5

Under-cabinet lighting is one of the simplest upgrades that makes a Newnan kitchen feel brand new. It puts bright, even light right on the countertop where you chop, read recipes and make coffee, and it fills in the shadows that overhead lights leave under your upper cabinets. The big question most homeowners ask us is whether to go with plug-in lights or have them hardwired. Here’s how the two compare, what to look for in the fixtures themselves, and when it makes sense to call a licensed electrician.

Why Under-Cabinet Lights Make Such a Difference

Most kitchens rely on a ceiling fixture or recessed lights for general light. Those work well for the room, but when you stand at the counter your own body and the upper cabinets block a lot of that light. Under-cabinet lighting fixes the problem at the source. It’s task lighting, aimed exactly where you work, and it also adds a soft glow in the evening when you don’t want every overhead light on.

In many older homes around Newnan, Sharpsburg and Senoia, the kitchen was built with a single overhead light and nothing under the cabinets. Adding them is often the most noticeable lighting change a homeowner can make without a full remodel.

Plug-In vs. Hardwired Under-Cabinet Lighting

Plug-in lights

Plug-in fixtures connect to a nearby countertop outlet with a cord. They’re quick to set up, but they come with trade-offs. Cords tend to show along the backsplash, they use up an outlet you probably need for appliances, and each light bar often has its own small switch, so turning them all on means reaching under several cabinets.

Hardwired lights

Hardwired fixtures are connected to your home’s wiring and run from a wall switch, just like any other light. There are no cords to hide, no outlets taken up, and the whole run comes on at once. Hardwired lights can also be put on a dimmer, a smart switch or a timer. For most homeowners who plan to stay in the house, hardwired is the cleaner, more permanent choice, and it’s the option buyers notice when a home goes on the market.

Hardwiring does mean adding or extending a circuit, running wire behind walls or cabinets, and making connections in approved boxes. That work belongs to a licensed electrician, not a weekend project. Kitchens have specific code rules for countertop circuits and GFCI protection, and a mistake behind the backsplash can be hard to find later.

Choosing the Right Fixtures

Once you’ve decided how the lights will be powered, the next choice is the fixture style. The three most common types are:

  • LED light bars. Slim, low-profile fixtures that mount to the underside of the cabinet and give a wide, even spread of light. They’re the most popular choice for everyday kitchens.
  • LED tape or strip lighting. Very thin and flexible, good for long runs, cabinets with a shallow lip, or a continuous line of light. It usually needs a small power supply (a driver) hidden in a cabinet.
  • Puck lights. Small round lights that create pools of light. They’re great for accent lighting inside glass-front cabinets, but they can leave dark spots on a working countertop.

A few details make a big difference in how the finished kitchen looks:

  • Color temperature. Warm white (around 2700K to 3000K) matches most homes and feels cozy. Neutral white (around 3500K to 4000K) looks crisper and suits modern kitchens with white or gray finishes. Try to match the color of your other kitchen lights so the room looks consistent.
  • Color rendering (CRI). A CRI of 90 or higher makes food, granite and wood tones look natural instead of washed out.
  • Placement. Mount the fixtures toward the front edge of the cabinet, not against the wall. That spreads light across the counter and keeps glare off glossy backsplashes and stone.
  • Dimming. If you want to dim them, choose fixtures and a dimmer that are rated to work together. Mismatched LED parts are a common cause of flicker and buzzing.

If you’ve had trouble with LEDs flickering on a dimmer before, our post on why LED lights flicker or buzz on a dimmer explains what’s usually going on.

Switches, Dimmers and Smart Controls

The best under-cabinet lighting is easy to use. Most homeowners want a dedicated switch near the kitchen entry or beside the main light switch. A dimmer switch lets you use the lights at full brightness while cooking and turn them low as a night light. Smart switches go a step further, with schedules, phone control and voice assistants. If you’re upgrading switches around the kitchen anyway, we can add USB outlets and smart switches at the same visit.

Planning Under-Cabinet Lighting During a Remodel

The easiest time to add under-cabinet lighting is when cabinets or backsplashes are being replaced. With the walls open, wiring can go exactly where it’s needed and every connection stays hidden. If you’re planning a kitchen update, bring the lighting into the plan early. Our kitchen and bathroom remodel electrical service and our guide to planning electrical work for a remodel cover what to think about before the cabinets go in.

Existing kitchens can get hardwired lights too. In many homes we can route wiring with minimal patching, depending on how the cabinets and walls are built. Depending on the scope and whether you live inside Newnan city limits or in unincorporated Coweta County, some work may need a permit. Our guide Do I Need an Electrical Permit in Newnan and Coweta County? explains how that works, and we pull permits when a job needs one.

When to Call a Licensed Electrician

A licensed electrician should handle any under-cabinet lighting that’s hardwired or needs a new switch, circuit or outlet. You should also call if you notice any of these with lights you already have:

  • Lights that flicker, buzz or turn on and off by themselves
  • A power supply or fixture that feels hot to the touch
  • A burning smell or discoloration near a fixture, cord or outlet
  • Countertop outlets that keep tripping when the lights are on

Those can point to a failing driver, a loose connection or an overloaded circuit, and our electrical troubleshooting team in Newnan can track down the cause.

Under-Cabinet Lighting Across Our Service Area

Shocking Electric Solutions, Inc. has worked on Newnan-area homes since 2008 and holds a Georgia Class II Unrestricted Electrical Contractor license (EN216120). We install under-cabinet lighting in Newnan and about 40 miles around, including Peachtree City, Tyrone, Sharpsburg, Senoia, Carrollton and Riverdale. Same-day and next-day appointments are often available, and estimates are free. See all of our lighting installation services.

Brighten Up Your Kitchen

Ready to add under-cabinet lighting or upgrade the lights you have? Call (678) 552-9399, or text (470) 516-7261. Many of our customers prefer texting, and our main line is a VOIP line that can’t receive texts, so please use the text number for messages. You can also email info@shockingelectricsolutions.com or visit us at 1002 Highway 16 W, Suite A, Newnan, GA 30263.

Related reading: wall sconce installation for hallways and stairs and why lights flicker.

Electrical emergencies can happen anytime. If you see sparks or smell burning, call us. Learn more about our residential electrical services in Newnan.