Electrical problem at home? Talk to a licensed Newnan electrician.

Free estimates · GA License EN216120 · Mon–Fri 8–5

It depends. Whether your electrical panel can handle an EV charger comes down to your service size, how much capacity is left after your other loads, and what kind of charger you want. A Level 2 charger usually needs a dedicated 240-volt circuit, and many homes on 100-amp service need a closer look before one goes in. A licensed electrician confirms that with a load calculation—not a guess from the breaker labels alone. If you live in Newnan or nearby, our EV charger installation team can check your panel and tell you exactly what you have to work with.

Here’s what “handle” means, how Level 1 and Level 2 differ, how electricians check capacity, signs you may need a panel or service upgrade, and what that looks like around Newnan and Coweta County.

What “Can My Panel Handle an EV Charger?” Actually Means

After buying an EV or plug-in hybrid, homeowners are usually asking three things:

  • Does the panel have physical space? A Level 2 circuit typically needs a double-pole breaker, which takes two adjacent slots.
  • Does the service have spare capacity? Your main breaker sets the ceiling for everything in the house at once—not just the empty slots you can see.
  • Is the wiring path workable? The run from the panel to the garage, carport or driveway has to be sized and protected correctly for that charger.

A “full” panel can sometimes still support a charger with a careful plan. Empty slots don’t guarantee capacity if the house already runs electric heat, a heat pump, a well pump or other big loads.

Level 1 vs. Level 2 Charging

Per the U.S. Department of Energy’s Alternative Fuels Data Center, most EV and plug-in hybrid drivers charge overnight at home with Level 1 or Level 2 equipment:

  • Level 1 uses a standard 120-volt household outlet. It’s the slowest option. Many drivers with short daily trips can meet their needs this way overnight if the outlet and circuit are in good shape.
  • Level 2 uses 240-volt power and charges much faster. It’s what most homeowners mean when they ask about installing a home EV charger, usually in a garage or with outdoor-rated equipment at a driveway or carport.

The U.S. EPA notes that Level 2 chargers commonly operate across a range of amperages, with many residential units around 30–40 amps, and that the branch-circuit breaker is typically sized at least 125% of the charger’s continuous load. As one EPA example, a 40-amp Level 2 charger would need a dedicated 50-amp circuit. Exact sizing follows the manufacturer’s instructions and the code your electrician applies.

If the plan includes a garage subpanel or a dedicated circuit, see our garage subpanel and dedicated circuit service as well.

How Electricians Check Whether Your Panel Can Handle It

This isn’t a DIY checklist—opening a panel or landing a new breaker is licensed work. Here’s what we look at:

Panel rating and main breaker

The panel label and main breaker show the service size—often 100, 150 or 200 amps in this area. The EPA’s home-charging guidance notes that homes with at least 200-amp service and two open breaker slots often have room for a Level 2 charger, while even 100-amp service can work depending on other loads. That “depending” is why the next step matters.

Available slots and panel condition

We check for two adjacent spaces for a double-pole breaker, whether the panel is listed for the breakers we’d use, and whether the panel itself is in good condition. Warm, buzzing, damaged or obsolete panels need attention before any new high-draw circuit is added. Older brands flagged on inspections—see our posts on Federal Pacific Stab-Lok panels and Zinsco panels—are often replaced rather than loaded further.

A real load calculation

A load calculation looks at how your home uses power—heating and cooling, water heating, cooking, laundry, wells, workshops and anything else already there—plus the planned EV charger. It’s the difference between “there’s an empty slot” and “this service can safely carry that load.” Under the National Electrical Code, EV charging is treated as a continuous load, so electricians size the circuit with headroom rather than matching amps one-for-one. We apply the locally adopted code—we don’t invent section numbers for a blog post.

Where the charger will live

Garage wall, exterior wall, carport or pedestal all change the wire run, outdoor ratings and mounting. Distance from the panel affects wire size and install scope, but the first question is still whether the service can support the charger you want.

Signs You May Need a Panel or Service Upgrade

You won’t know for sure until someone calculates the load, but these are common flags:

  • Your main breaker is 100 amps (or less) and the house already has several large electric loads.
  • The panel has no spare double-pole spaces, or it’s packed with tandem breakers already.
  • Lights dim when big appliances start, or breakers trip when several large loads run together.
  • You’re planning more than one EV, a workshop, a hot tub or an addition along with the charger.
  • The panel is outdated, damaged or a brand your inspector already flagged for replacement.

When capacity is the issue, an electrical panel upgrade or an electrical service upgrade is often the clean fix. Sometimes a garage subpanel helps organize new circuits after the main service is confirmed adequate. Estimates are free—we don’t post price ranges online because every home is different.

What a Panel or Service Upgrade Involves

If an upgrade is needed, here’s the high-level outline. None of this is DIY work:

  • Free estimate. We review the existing panel, service size, charger location and other planned loads.
  • Permits when the job needs them. Panel replacements and service upgrades typically need a permit; the City of Newnan and Coweta County handle them differently by location. Home EV charger installs in our area usually don’t need an electrical permit on their own, but a licensed electrician confirms what the local office requires for that job. See Do I Need an Electrical Permit in Newnan and Coweta County?—we pull permits when a job needs one.
  • Utility coordination when required. Service upgrades that change the meter connection involve the power company.
  • Installation and inspection. Power is off for part of the workday while new equipment goes in, then the job is inspected as the permit requires.

EV Chargers and Panels Around Newnan

Shocking Electric Solutions, Inc. installs home EV chargers and upgrades panels across Newnan and about 40 miles around, including Peachtree City, Tyrone, Sharpsburg, Senoia, Carrollton and Riverdale. We’ve been in business since 2008 and hold a Georgia Class II Unrestricted Electrical Contractor license (EN216120). Same-day and next-day appointments are often available, and estimates are free.

Homes here range from older Newnan cottages on smaller services to newer Peachtree City and Sharpsburg subdivisions with 200-amp panels. We’ve installed Level 2 chargers on both ends—sometimes with a dedicated circuit, sometimes after a panel or service upgrade.

When to Call a Licensed Electrician

Call before you buy a hardwired charger or schedule an installer who won’t look at your panel. You should also call if your panel feels warm, buzzes or smells like burning; if breakers trip when large loads run together; or if a home inspector flagged the panel and you want EV charging in the plan. Never open the inner panel cover, land a new breaker or upsize a breaker to “make room” for a charger. The breaker protects the wire—a larger breaker on the wrong wire is a fire risk.

Frequently Asked Questions

Can a 100-amp panel handle an EV charger?

Sometimes. The EPA notes that even 100-amp service can be enough depending on your other loads, especially with a lower-amperage Level 2 charger. Many 100-amp homes still need a load calculation—and some need a panel or service upgrade—before a typical Level 2 circuit is added. Have a licensed electrician check yours.

Do I need a 200-amp panel for a Level 2 EV charger?

Not always. Many 200-amp homes with open breaker spaces can add a Level 2 charger without a service change, but 200 amps is not automatic approval and 100 amps is not an automatic no. Capacity depends on the whole-house load calculation.

What size circuit does a Level 2 EV charger need?

Most home Level 2 chargers need a dedicated 240-volt circuit. Amperage varies by model; many residential units are in the 30–40 amp range, and the EPA notes the breaker is typically sized at least 125% of the charger’s continuous load (for example, a 40-amp charger on a 50-amp circuit). Follow the manufacturer’s instructions and have a licensed electrician size the circuit.

Do I need a permit to install an EV charger in Newnan or Coweta County?

Home EV charger installs in our area usually don’t need an electrical permit on their own. Panel upgrades and service upgrades typically do, and the City of Newnan vs. Coweta County offices differ by location. A licensed electrician confirms what the local office requires for that specific job.

Can I use a regular dryer outlet for an EV charger?

Some plug-in Level 2 chargers are designed for specific 240-volt receptacle types, but sharing a dryer circuit or adapting outlets without a proper evaluation is unsafe. EV charging is treated as a continuous load, and the circuit, receptacle and charger have to match. Ask a licensed electrician before using any existing 240-volt outlet for charging.

How long does an EV charger install take in the Newnan area?

A straightforward dedicated-circuit install is often completed in a day once parts and scheduling line up. Jobs that need a panel or service upgrade take longer because of permitting and, when required, utility coordination. Same-day and next-day appointments are often available for the evaluation visit.

Get a Clear Answer on Your Panel

Ready to find out whether your panel can handle an EV charger? Call (678) 552-9399, or text (470) 516-7261. Many of our customers prefer texting, and our main line is a VOIP line that can’t receive texts, so please use the text number for messages. You can also email info@shockingelectricsolutions.com or visit us at 1002 Highway 16 W, Suite A, Newnan, GA 30263.

Electrical emergencies can happen anytime. If your panel is sparking, smoking or smells like it’s burning, call us. Learn more about our residential electrical services in Newnan, EV charger installation and electrical panel upgrades.

Sources: U.S. EPA, “Getting Started with Home EV Charging”; U.S. Department of Energy Alternative Fuels Data Center, “Charging Electric Vehicles at Home”; ENERGY STAR / DOE guidance on EV-ready homes (dedicated 240V / ~40-amp branch-circuit planning). Local permit needs vary—confirm with a licensed electrician and the City of Newnan or Coweta County for your address.