Electrical problem at home? Talk to a licensed Newnan electrician.

Free estimates · GA License EN216120 · Mon–Fri 8–5

Homes around Haralson sit at the end of long overhead lines, and when a storm or a utility problem takes the power out, it can stay out longer than it does in town. A properly installed transfer switch or generator inlet is how a home safely runs on a generator during an outage, and it’s electrical work that belongs with a licensed electrician. Our Haralson electrician service includes generator hookups for homes in the area.

Why a Generator Needs a Proper Connection

A generator that’s hooked into a home’s wiring the wrong way can send power back out onto the utility’s lines. That puts line crews and neighbors at risk and can destroy the generator. It can also damage your home’s wiring. The safe way to do it is a transfer switch or an interlock-and-inlet setup installed by a licensed electrician, which keeps your home’s circuits separated from the utility while the generator runs. Please don’t connect a generator to your house any other way.

Portable and Standby Generators in Haralson Homes

Portable generators

Many Haralson homeowners use a portable generator because it costs less than a standby unit and can be moved or stored. A licensed electrician can install an inlet on the outside of the house and a transfer switch at the panel, so the generator can feed selected circuits without running cords through the house.

Standby generators

A permanently installed standby generator starts on its own when the power goes out. The electrical side of that setup, the transfer switch, the wiring and the circuit sizing, is work for a licensed electrician, and it’s planned around what the home actually needs to keep running.

What Rural Homes Often Want to Keep Running

Around Haralson, homes commonly rely on well pumps, refrigerators and freezers, and heating and cooling equipment. When we plan a generator hookup, we talk through which circuits matter most, size the transfer switch to match and label everything. For homes on a well, we work on the house side of the pump circuit only. We start with a load calculation so you know what the generator can and can’t carry before any work begins.

Signs You Should Talk to an Electrician About a Generator Hookup

  • Outages in your area tend to last hours instead of minutes
  • You’re running extension cords through windows or doors during outages
  • You already own a generator but have no safe way to connect it
  • You depend on a well pump, medical equipment, a freezer or a sump pump
  • Your panel is old or full, and you’re not sure it can handle a transfer switch
  • You want a standby unit and need the electrical side planned correctly

What to Expect From the Visit

A visit for a generator hookup typically covers:

  • A look at your panel, your service and where the generator would sit
  • A load calculation to size the transfer switch and circuits
  • A plan for which circuits the generator will power
  • A clear explanation of your options and the work before it begins

We cover the details on our generator and transfer switch page. If your panel needs attention first, we’ll tell you.

Serving Haralson and the Surrounding Area

Shocking Electric Solutions has been serving homeowners since 2008. We’re a family-owned company with a Georgia Class II Unrestricted Electrical Contractor license (EN216120), a 4.9-star Google rating and a simple slogan: Done Right The First Time. Estimates are free, and same-day and next-day appointments are often available.

Haralson is at the southern tip of Coweta County, and we plan trips there ahead, so call or text to set up a time that works for you. We also serve nearby Senoia and Luthersville, along with Grantville and the rest of Coweta County.

Frequently Asked Questions

Why do I need a transfer switch for a generator?

A transfer switch keeps your home’s wiring separated from the utility’s lines while the generator runs. Without one, a generator can send power back onto the lines, which is dangerous for line crews and can damage your equipment.

Can you connect a generator I already own?

In most cases, yes. A licensed electrician can install a generator inlet and transfer switch sized for the generator you have, after looking at your panel and the circuits you want to power.

Can a generator power my well pump?

It can be set up to. We work on the house side of the pump circuit only, and we size the transfer switch and the generator’s load around it.

Plan a Generator Hookup in Haralson

If you want a safe way to keep your Haralson home running during the next outage, call or text for a free estimate. Call (678) 552-9399, or text (470) 516-7261. Many of our customers prefer texting, and our main line is a VOIP line that can’t receive texts, so please use the text number for messages. You can also email info@shockingelectricsolutions.com or visit us at 1002 Highway 16 W, Suite A, Newnan, GA 30263.