Pool Pump Wiring, Bonding & GFCI in Newnan, GA
Pool electrical work has its own section of the National Electrical Code for a reason: water, metal and electricity close together. Shocking Electric Solutions wires pool pumps, heaters, lights, automation and other pool equipment, and installs the bonding and GFCI protection that keep a pool area safe, for homes throughout Newnan and Coweta County.
Pool Electrical Services
- Dedicated circuits for pool pumps, variable-speed pumps and booster pumps
- Circuits for pool heaters and heat pumps
- Pool and spa lighting circuits and low-voltage transformers
- Wiring for pool automation panels and timers
- Disconnects within sight of the equipment
- GFCI protection for pool equipment and outlets near the pool
- Equipotential bonding of the pool, pump and nearby metal
- Replacing corroded or damaged equipment wiring
Why Pool Bonding Matters
Bonding connects the pool steel, the pump motor, ladders, rails, the water and other nearby metal with a solid copper conductor so they all sit at the same voltage. That way, if a fault occurs, there is no voltage difference for a swimmer to feel. Bonding is not the same as grounding, and it is often missing or broken on older pools, after equipment replacements, or after a deck has been redone. We check the bonding as part of every pool equipment job.
GFCI Protection Around Pools
Pool pump motors, outlets near the pool and pool lighting need GFCI protection under current code. A GFCI that trips on the pool circuit is often telling you something, such as moisture in a junction box, a failing pump motor or damaged wiring. Read why a GFCI keeps tripping and why a GFCI trips when it rains.
Replacing a Pool Pump or Heater
A new variable-speed pump or heater may need a different circuit size, a new disconnect or updated bonding. We check the nameplate rating, the existing circuit and the panel before the new equipment goes in, so it starts up safely and the breaker is sized correctly.
Signs Your Pool Wiring Needs Attention
- The pump breaker or GFCI trips often
- You feel a tingle in the water or from metal near the pool
- Wiring at the equipment pad is corroded, loose or exposed
- Extension cords are being used for pool equipment
- Pool lights flicker or do not work
If you ever feel a tingle in or near the pool, get everyone out of the water, keep people away and call us. That is a warning sign of a bonding or grounding problem.
Hot Tubs and Spas
For hot tub and spa circuits, see our page on hot tub wiring in Newnan. Many of the same rules for GFCI protection, disconnects and bonding apply.
The Equipment Pad
Most pool equipment sits on a pad near the pool: pump, filter, heater or heat pump, automation panel and sometimes a salt cell. Each piece needs the right circuit, a disconnect within sight, wiring in conduit rated for wet locations, and a bonding connection. Over time, sun, water and lawn equipment can damage conduit and fittings, and pad wiring is one of the first places we look when a pool breaker or GFCI trips.
Pool Lighting
Pool lights run on line voltage or low voltage through a transformer, and both need GFCI protection or other protection required by code. LED pool light upgrades often use the existing niche and conduit. We check the wiring and the bonding while we are there.
Why Homeowners Choose Shocking Electric Solutions
- Georgia Class II Unrestricted electrical contractor license EN216120
- Serving Newnan and Coweta County since 2008, with IBEW Local 613 training behind our work
- Free estimates, so you know the plan before any work starts
- A 2-year warranty on our workmanship
- A 4.9-star rating on Google
- Same-day and next-day appointments often available
- Our motto: Done Right The First Time.
Serving Newnan and Nearby Communities
We serve homeowners throughout Newnan and Coweta County, plus Sharpsburg, Senoia, Moreland, Grantville, Turin, Peachtree City, Tyrone, Fayetteville, Palmetto, Carrollton and other towns within about 40 miles. Our office is at 1002 Highway 16 W, Suite A, Newnan, GA 30263.
Related Reading
- Hot tub and spa wiring
- Subpanels and dedicated circuits
- Landscape and outdoor lighting
- Whole-home surge protection
- Electrical panel upgrades
Need Pool Electrical Work?
Get a free estimate for pool pump wiring, bonding and GFCI protection in Newnan and Coweta County.
Call (678) 552-9399 or text (470) 516-7261. Office hours are Monday through Friday, 8 AM to 5 PM.
Learn more about Shocking Electric Solutions, your Newnan, GA electrician.
Frequently Asked Questions
What is pool bonding?
Bonding connects the pool steel, pump, ladders, rails and nearby metal so they are at the same voltage. It reduces the chance of shock if a fault occurs.
Does a pool pump need GFCI protection?
Under current code, pool pump motors and outlets near the pool need GFCI protection. We check and add it where it is missing.
Why does my pool pump keep tripping the GFCI?
Moisture in a box or fitting, a failing motor or damaged wiring are common causes. We test the circuit and the pump to find the source.
Can you wire a new variable-speed pool pump?
Yes. We check the pump rating and the existing circuit, update the breaker, disconnect and bonding as needed, and make the connection.
Are estimates free?
Yes. Call (678) 552-9399 or text (470) 516-7261 to set up a free estimate.