Electrical problem at home? Talk to a licensed Newnan electrician.
Free estimates · GA License EN216120 · Mon–Fri 8–5
Now that the days are shorter, a lot of Newnan homeowners are pulling into dark driveways and fumbling for keys on an unlit porch. Motion sensor lights are one of the easiest ways to fix that. They come on when someone walks up, they shut off on their own, and they make a house a much less inviting target after dark. Here’s how to place them, set them up so they work the way you expect, and what it means when they stay on all night or won’t come on at all.
Why Motion Sensor Lights Are Worth It
A light that’s on all night costs energy and can annoy the neighbors. A light that’s never on doesn’t help anyone. Motion lights sit in the middle. They give you bright light exactly when someone is moving near the house, whether that’s you carrying groceries in, a delivery driver at the door, or someone who shouldn’t be there. A sudden light is often enough to send a would-be intruder somewhere else, which is why motion lighting is a big part of the outdoor security lighting we install around Newnan.
They also help with safety. Steps, sloped driveways and side yards are common places for trips and falls in the dark, and a light that comes on automatically means nobody has to remember to flip a switch.
Where to Put Motion Sensor Lights
Placement matters more than brightness. A few spots cover most homes:
- The driveway and garage. A fixture over the garage doors lights your path from the car to the house and covers the area where vehicles are parked.
- Front and back doors. These are the main ways in, so they should be well lit. Many homeowners pair a decorative porch light with a separate motion light, or use a fixture that glows softly and brightens fully when it senses motion.
- Side yards and gates. The narrow strip along the side of a house is often the darkest part of the property and an easy path to the backyard.
- Decks, patios and steps. Light here makes it safer to take out the trash or let the dog out at night.
- Sheds and detached garages. A light on an outbuilding makes it easier to see and harder to break into.
Mount the fixture high enough that it’s hard to reach and tamper with, usually around 8 to 10 feet, and aim the sensor across the path people will walk, not straight down it. Most motion sensors pick up side-to-side movement much better than someone walking straight toward them.
Setting Up Motion Lights the Right Way
Most motion fixtures have a few small adjustments on the sensor. Getting them right is the difference between a light you love and one that drives you crazy:
- Sensitivity or range. Turn this down if cars passing on the street or tree branches set the light off. Turn it up if you have to wave your arms to get it to come on.
- Time setting. This controls how long the light stays on after motion stops. A minute or two is plenty for most doors. Longer times are useful for driveways where you need time to unload.
- Dusk-to-dawn (photocell). A built-in light sensor keeps the fixture from turning on during the day. If it’s covered by an eave or pointed at another light, it can get confused about whether it’s dark.
- Dual-brightness mode. Some fixtures stay at a low glow all night and jump to full brightness when they sense movement. It’s a nice option for front porches and walkways.
Choose LED fixtures rated for outdoor wet locations. They use far less energy than old halogen floods, run cooler and last much longer. If you want to light up a bigger area like a long driveway or the back of the property, our exterior flood light installation service covers brighter fixtures and better placement.
Common Motion Light Problems and What They Mean
The light stays on all the time
If a motion light never shuts off, someone may have flipped the wall switch off and back on quickly, which puts many fixtures into a manual override mode. Turning the switch off for about a minute usually resets it. If that doesn’t work, the sensor may be failing, the time setting may be maxed out, or something like a heat vent or a swaying plant is constantly setting it off.
The light won’t turn on at all
Start with the simple things. Make sure the wall switch is on, check that the bulb or LED module hasn’t burned out, and see whether a GFCI outlet in the garage, bathroom or outside has tripped, since outdoor lights are sometimes on the same circuit. If the light is on a circuit that keeps tripping, or a whole section of the house is out, see our guide to why a breaker keeps tripping.
The light turns on and off by itself
Random cycling at night is usually caused by the sensor picking up cars, animals, or wind moving branches. Lowering the sensitivity or re-aiming the sensor often fixes it. If the light flickers or buzzes rather than switching cleanly, that can point to a loose connection or a failing fixture, and that’s worth having checked.
The light flickers, buzzes or the fixture is damaged
Georgia storms, summer heat and moisture are hard on outdoor fixtures. Water inside the fixture, cracked housings, rust, scorch marks or a burning smell are all signs to stop using the light and have it looked at. Don’t open up a wet or damaged fixture yourself.
When to Call a Licensed Electrician
Swapping a bulb or adjusting the sensor dials is fine for a homeowner. Anything that involves the wiring is a job for a licensed electrician. That includes adding a new light where there isn’t one, running power to a side yard or outbuilding, replacing an old fixture with a new one, or installing a new switch. Outdoor electrical work has its own rules for weatherproof boxes, wet-location fixtures and GFCI protection, and mistakes outside can be dangerous. If a light isn’t working and you can’t find a simple reason, our electrical troubleshooting and repair team can track it down.
If you’re also thinking about the look of your yard, motion lights pair well with low-voltage landscape lighting for paths and plantings, and many homeowners add smart switches so they can control porch and flood lights from their phone.
Outdoor Lighting Across Our Service Area
Shocking Electric Solutions, Inc. has worked on Newnan-area homes since 2008 and holds a Georgia Class II Unrestricted Electrical Contractor license (EN216120). We install motion sensor and security lighting in Newnan and about 40 miles around, including Peachtree City, Tyrone, Sharpsburg, Senoia, Carrollton and Riverdale. Same-day and next-day appointments are often available, and estimates are free. See all of our lighting installation services.
Light Up Your Home This Winter
Ready to add motion lights or fix ones that aren’t working right? Call (678) 552-9399, or text (470) 516-7261. Many of our customers prefer texting, and our main line is a VOIP line that can’t receive texts, so please use the text number for messages. You can also email info@shockingelectricsolutions.com or visit us at 1002 Highway 16 W, Suite A, Newnan, GA 30263.
Electrical emergencies can happen anytime. If you see sparks or smell burning, call us. Learn more about our residential electrical services in Newnan.