Outdoor Security Lighting Installation in Newnan, GA

Good security lighting makes your home easier to see around, harder to approach unseen and safer to walk at night. Shocking Electric Solutions plans and installs outdoor security lighting for homes in Newnan and Coweta County, with the wiring, controls and weather protection done right.

Start With a Lighting Plan

We walk the property with you and look at entries, driveways, garage doors, side yards, the back patio and dark corners. The goal is even coverage without glare into windows or onto neighbors. A few well-placed fixtures usually work better than one very bright light.

Motion, Dusk-to-Dawn and Smart Controls

• Motion sensor lights turn on when someone approaches and save energy the rest of the night
• Dusk-to-dawn lights use a photocell to keep entries and driveways lit all night
• Timers and smart switches let you set schedules or control lights from your phone
• Combined controls can keep a low light on all night and brighten on motion

Power for Cameras, Doorbells and Soffit Lights

Security cameras and video doorbells work best with reliable power. We can add soffit-mounted outlets or junction boxes for cameras, replace doorbell transformers and wire eave lights so the whole system runs from proper circuits instead of extension cords.

Wiring and Weather Protection

Outdoor fixtures need wet-rated boxes, sealed connections and GFCI protection where code requires it. When a new circuit is needed, we size it correctly and route it cleanly. Where the job needs a permit, we handle it.

Floodlights or Security Lighting?

Floodlights are one part of a security lighting plan. If you mainly need bright light over a driveway, yard or court, see our LED flood light installation page. For a full outdoor plan with landscape and path lights, see landscape lighting. Our outdoor security lighting installation guide covers fixture choices and placement in more detail.

Placement Details That Make a Noticeable Difference

Mount security lights high enough that they are difficult to tamper with, but not so high that the light misses the area below. A fixture above a garage, for example, should be aimed to cover the drive and the approach to the home rather than sending most of its output into the street or tree canopy.

At entry doors, position lights so they illuminate a visitor’s face without shining directly into the eyes of someone at the door. This is especially useful for doorbell cameras and other security cameras. Cameras need balanced lighting, not a bright hotspot with a completely dark background.

Be considerate of property lines. Light trespass can create tension with neighbors and may violate local rules in certain commercial or multifamily settings. Adjustable fixture heads, shielding, and careful aiming keep light on your property where it belongs.

For commercial sites, check light levels from the perspective of employees and customers. The walk from a vehicle to the door should be visible, addresses and signs should be easy to find, and service routes should not leave staff walking through blind spots after hours. Lighting can also support safer maintenance work around electrical equipment, HVAC units, and loading areas.

Wiring Is Where Safety and Reliability Are Decided

The fixture is the visible part of the project. The electrical connections behind it determine whether the installation remains safe through rain, humidity, heat, storms, and daily use.

Outdoor circuits require appropriate protection and materials. Depending on the location and existing electrical system, that can include weatherproof boxes and covers, properly rated cable or conduit, sealed fittings, GFCI protection, and correct grounding. The circuit must also be sized and connected correctly for the load. Adding several high-output fixtures to an overloaded circuit can lead to nuisance tripping, unreliable performance, or a more serious electrical issue.

A common mistake is tapping into an existing exterior light or receptacle without checking what else is already on that circuit. Older homes may have exterior devices tied to areas that are already heavily used indoors. Commercial properties can have more complex systems, including lighting controls, dedicated circuits, and equipment that must remain accessible and clearly identified.

Professional installation also addresses how the wiring gets from the panel or source location to the fixture. Exposed cable, improvised splices, damaged conduit, or connections hidden where they cannot be serviced are not lasting solutions. Clean, code-compliant workmanship protects the property and makes future repairs or upgrades far easier.

When low-voltage lighting makes sense

Low-voltage landscape lighting can be a good addition around walkways, landscaping, retaining walls, and certain outdoor living spaces. It creates a welcoming path of visibility and can reduce the need for powerful lights near the house. However, it is not a replacement for properly installed line-voltage security lighting at critical entries, parking areas, or large open spaces.

If you want both, use each system for its strength. Low-voltage lighting can guide people safely through the property, while dedicated security fixtures provide clear illumination at doors, gates, and vulnerable areas.

Signs Your Existing Exterior Lighting Needs Attention

Do not wait for complete failure if your outdoor lights are already acting unpredictably. Flickering, repeated breaker trips, fixtures that work only sometimes, water inside the lens, scorched wiring, cracked boxes, or a motion sensor that will not reset all deserve attention. A bulb change will not fix a loose connection, failing circuit, damaged cable, or moisture intrusion.

Older fixtures may also be using far more power than necessary while providing poor light coverage. Replacing them with properly placed LEDs and modern controls can improve visibility and reduce operating costs at the same time.

If a breaker trips after rain, a fixture sparks, or you notice a burning odor, turn off the affected circuit if it is safe to do so and arrange electrical service promptly. Exterior electrical issues are exposed to moisture and weather, so they should not be treated as a minor inconvenience.

Why Homeowners Choose Shocking Electric Solutions

• Georgia Class II Unrestricted electrical contractor license EN216120
• Serving Newnan and Coweta County since 2008, with IBEW Local 613 training behind our work
• Free estimates, so you know the plan before any work starts
• A 2-year warranty on our workmanship
• A 4.9-star rating on Google
• Same-day and next-day appointments often available
• Our motto: Done Right The First Time.

Serving Newnan and Nearby Communities

We serve homeowners throughout Newnan and Coweta County, plus Sharpsburg, Senoia, Moreland, Grantville, Turin, Peachtree City, Tyrone, Fayetteville, Palmetto, Carrollton and other towns within about 40 miles. Our office is at 1002 Highway 16 W, Suite A, Newnan, GA 30263.

View our full service areas

Related Services

• Lighting installation in Newnan
• Outdoor outlet and GFCI services
• All residential electrical services

Learn more about Shocking Electric Solutions, your Newnan, GA electrician.

Frequently Asked Questions

Should security lights stay on all night or use motion sensors?

Many homes use both: dusk-to-dawn lights at entries and motion lights in side yards and driveways. We help you choose based on your property.

Can you add power for security cameras?

Yes. We add outlets or junction boxes at soffits and eaves so cameras and video doorbells have reliable power.

Do LED security lights bother neighbors?

They can if they are aimed poorly. We choose fixtures and aiming angles that light your property without glare into neighboring homes.

Are estimates free?

Yes. Call (678) 552-9399 or text (470) 516-7261 to set up a free estimate.

Contact Shocking Electric Solutions