Electrical Code Violations in Newnan, GA

Licensed electrical contractor Shocking Electric Solutions, Inc. finds and fixes electrical code violations for homeowners, buyers, sellers, and landlords in Newnan, GA and across Coweta County, along with nearby communities including Peachtree City, Tyrone, Sharpsburg, Senoia, Moreland, Grantville, Carrollton, Fayetteville, and Riverdale. Whether a home inspector flagged problems before a sale, a permit inspection did not pass, or you have inherited someone else’s DIY wiring, we sort out what actually needs to be corrected, fix it to code, and test the work before we leave.

When You Need Code Violations Fixed

Most people call us about code problems at a deadline: a closing date, a reinspection, an insurance requirement, or a new tenant moving in. Others simply suspect that something in the house was not done right. The most common situations we see around Newnan include:

A home inspection report before a sale or purchase that lists electrical defects or recommends evaluation by a licensed electrician
A failed rough-in or final inspection on a permitted project, with a correction notice from the inspector
Remodels, basement finishes, or additions where earlier work was done without a permit
DIY or handyman wiring discovered behind walls, in the attic, or in the crawlspace
Insurance or lender requests to correct specific electrical items
Rental properties that need hazards corrected before a new lease

Common Electrical Code Violations We Correct

Double-tapped breakers: two wires under a breaker terminal that is only listed for one conductor
Missing GFCI protection in bathrooms, kitchens, garages, outdoors, laundry areas, unfinished basements, crawlspaces, and near sinks
Missing AFCI protection on circuits where the code requires arc-fault protection
Ungrounded three-prong outlets installed on old two-wire circuits with no equipment ground
Open or buried junction boxes, missing covers, and splices made outside of a box
Improper DIY wiring, such as undersized wire, loose connections, unprotected cable, and extension cords used as permanent wiring
Reversed polarity and open neutrals found during outlet testing
Panel problems, including missing knockouts or filler plates, wrong breaker sizes, and an unlabeled or inaccurate circuit directory
Grounding and bonding defects at the service, subpanels, water piping, and gas piping
Smoke detector circuit issues, such as missing, disconnected, or non-interconnected hardwired smoke alarms

Failed Home Inspections Before a Sale or Purchase

A home inspector’s report is not a code enforcement document, but it often lists electrical items that need a licensed electrician. For sellers, we review the electrical section of the report, confirm which items are true defects, and correct them so the sale can move forward. For buyers, we can evaluate the items before closing so you know what you are getting into. When the work is done, you receive a written invoice describing the repairs that you can share with your agent, the other party, or the inspector. If you want a broader look at the system first, see our electrical inspection checklist and electrical inspection cost guides.

Permit and Inspection Corrections

When a permitted job does not pass inspection, the inspector usually leaves a list of corrections. We walk through that list with you, explain what each item means in plain terms, make the corrections, and work with the permit holder and the local inspection office on the reinspection. Permits and inspections around here are handled by the city or county where the property is located, such as the City of Newnan, Coweta County, or Peachtree City, and procedures differ from one jurisdiction to the next. When corrective work needs its own permit, we pull it as the licensed electrical contractor on the job.

Double-Tapped Breakers and Panel Corrections

A double tap happens when two circuit wires are connected under a single breaker terminal that is not designed for it. The connection can loosen over time, overheat, and cause intermittent outages. We correct double taps by adding a breaker, using a breaker listed for two conductors, or properly pigtailing the circuits, depending on the situation. While we are in the panel we also look for wrong-size breakers, missing filler plates, overheating, and other issues that home inspectors commonly flag, including certain older panel brands. If the panel itself is the problem, we will explain your options, which may include an electrical panel upgrade.

Panel Labeling and Circuit Directories

An inspector expects every circuit in the panel to be clearly and accurately identified. A directory that says “misc” or is missing entirely makes it hard to shut off the right circuit in an emergency. We trace the circuits, label each breaker by the area or appliance it serves, and update the directory so it matches the house as it is wired today.

GFCI and AFCI Protection

Ground-fault circuit interrupter (GFCI) protection guards against shock in wet and damp locations, and arc-fault circuit interrupter (AFCI) protection helps reduce the risk of fires caused by arcing in damaged wiring. Missing GFCI protection is one of the most common items on inspection reports. We install GFCI receptacles or breakers where they are needed, add AFCI protection where the code calls for it, and track down the cause when a protective device keeps tripping. Learn more on our outlet and GFCI services page.

Ungrounded Outlets and Grounding Problems

Many older homes have three-prong outlets installed on two-wire circuits that have no equipment ground, which can make a tester show “open ground.” Depending on the circuit, the fix may be running a new grounding conductor, providing GFCI protection and labeling the outlets as the code allows, or rewiring the circuit. We also check the grounding electrode system and bonding at the service, verify that neutrals and grounds are separated at subpanels, and confirm that metal water and gas piping are bonded where required. If much of the house is on old wiring, a complete home rewire may be the better long-term fix.

Open Junction Boxes and Improper DIY Wiring

Open boxes, splices taped together inside a wall, cable stapled across an attic walkway, and wiring that runs without protection in a garage or crawlspace are all common findings. These are more than cosmetic issues: loose or exposed connections can overheat and are easy to damage. We install proper boxes and covers, keep every splice accessible, replace undersized or damaged wire, and secure and protect cable the way the code requires.

Smoke Detector Circuits

Building codes for new construction, and for many additions and renovations, call for hardwired smoke alarms that are interconnected so that when one sounds, they all sound. We repair and install hardwired smoke alarm circuits, replace disconnected or outdated alarms, and restore interconnection. For placement guidance, see our article on smoke detector placement.

Working With Inspectors and the Code

Shocking Electric Solutions, Inc. is a licensed electrical contractor and works to the National Electrical Code (NEC) as adopted in Georgia, along with any state or local amendments. We do not argue with inspectors or look for shortcuts. If we disagree with a finding, we discuss it respectfully and with reference to the code, and if the inspector is right, we fix it. Our goal is work that passes the first time and stays safe for years.

Why Hire a Licensed Electrician

A licensed electrician is accountable for the quality and safety of the work
Corrections made to the electrical code adopted in Georgia, not just patched to pass
Permits pulled where the local jurisdiction requires them
A written invoice describing the work for buyers, sellers, agents, and inspectors
All code correction work is backed by our 2-year warranty

What to Expect on a Visit

Send us the inspection report or correction notice ahead of time if you have one, or tell us what you have noticed.
We inspect each item on site, along with the panel and the circuits involved.
We explain which items are true code violations or safety hazards, which are recommendations, and what each correction involves, and we give you a quote before any work begins.
We make the corrections, pulling a permit where one is required.
We test the work, clean up, and provide documentation you can share with your agent, buyer, or inspector.

Service Areas

Newnan, GA is our home base, and we correct electrical code violations throughout Coweta County and in communities within about 40 miles of Newnan, including:

Newnan
Peachtree City
Tyrone
Sharpsburg
Senoia
Moreland
Grantville
Carrollton
Fayetteville
Riverdale

Our shop is at 1002 Highway 16 W, Suite A, Newnan, GA 30263. Looking for a general electrician? See our electrician in Newnan, GA page.

Frequently Asked Questions

Do I have to bring my whole house up to current code?

Usually not. Wiring that met the code when it was installed is generally allowed to remain unless it is unsafe or is being altered, and some updates are required when you remodel or add circuits. We tell you which items are required corrections and which are recommended safety upgrades, so you can decide what to do.

My home inspection report lists electrical issues. Can you fix them before closing?

Yes. Send us the electrical section of the report and we will review it, visit the home, and give you a quote on the corrections. After the work is done, you get a written invoice describing what was repaired to share with your agent or the other party. Contact us as early as you can so the work fits your closing timeline.

What is a double-tapped breaker, and is it dangerous?

A double tap is two wires connected under a breaker terminal that is designed for only one. The connection can loosen, overheat, and cause outages, so it should be corrected. The fix is usually simple, such as adding a breaker or properly joining the circuits.

Can you fix work another contractor or a previous owner did?

Yes. Much of what we correct is earlier DIY or unpermitted work. We evaluate what is there, explain what needs to change, and bring it up to code, pulling a permit where the jurisdiction requires one.

Can you handle the reinspection after a failed inspection?

We make the corrections on the inspector’s list and work with the permit holder and the local inspection office on the reinspection. If the corrective work needs its own permit, we pull it as the licensed contractor.

Are two-prong outlets a code violation?

Two-prong outlets on an ungrounded circuit are not automatically a violation in an older home, but replacing them with three-prong outlets without a ground or GFCI protection is. We test the circuit and recommend the safe, code-compliant option, such as GFCI protection or adding a ground.

Related Services

Schedule Code Violation Repairs in Newnan

Have an inspection report, a correction notice, or wiring you are not sure about? Call Shocking Electric Solutions, Inc. at (678) 552-9399, or text us at (470) 516-7261 if texting is easier. Our main line is a voice-only line and cannot receive texts, so please use the text number for messages. You can also email info@shockingelectricsolutions.com or contact us online. Our office hours are Monday through Friday, 8 AM to 5 PM. We are at 1002 Highway 16 W, Suite A, Newnan, GA 30263, and serve Newnan, Coweta County, and communities within about 40 miles. All of our work is backed by a 2-year warranty.

Fixing Electrical Code Violations in Newnan, GA