Electrical problem at home? Talk to a licensed Newnan electrician.
Free estimates · GA License EN216120 · Mon–Fri 8–5
As the days get shorter around Newnan and Coweta County, a lot of homeowners notice the same thing: the walk from the driveway to the front door gets darker, the porch steps are harder to see, and the yard that looked inviting at dusk now disappears into shadow. Landscape lighting fixes that. Soft path lights, a few well-aimed spots on trees or the facade, and lights on steps or a deck make evenings safer and give the house better curb appeal without turning the yard into a stadium.
If you’re thinking about adding lights to your walks, plantings or patio this fall and winter, here’s what Newnan homeowners usually include, how low-voltage and line-voltage systems differ at a high level, placement tips that actually help, and when it’s time to call a licensed electrician. Our landscape lighting service covers planning and installation for homes across the area.
What Landscape Lighting Usually Includes
Landscape lighting is more than a couple of stake lights stuck in a flower bed. A good plan covers the places people walk and the features worth seeing at night:
- Path and walkway lights. Low fixtures along sidewalks, front walks and garden paths so you can see where you’re stepping.
- Step and stair lights. Small lights built into risers, stringers or nearby walls that make porch steps and deck stairs safer.
- Spotlights and uplights. Fixtures aimed at trees, columns, stonework or the front of the house to add depth and curb appeal.
- Deck and patio lighting. Soft light for outdoor seating, rails and cooking areas so evenings outside feel usable after dark.
- Entry and accent lights. Fixtures near the front door, gate or driveway edge that welcome guests and mark the way in.
Many homeowners pair landscape lighting with brighter exterior flood lights or motion sensor lights for driveways and side yards. Landscape lights set the mood and light the path; flood and motion lights cover larger areas when you need more brightness or security.
Low-Voltage vs Line-Voltage: What Matters for Homeowners
Most residential landscape lighting today is low-voltage. A transformer near the house steps household power down to a safer voltage that runs out to the fixtures. That setup is popular for path lights, spots and many deck lights because the cable can be buried shallow in the yard, fixtures are easy to move when plantings change, and the system is generally safer around kids, pets and wet grass.
Line-voltage outdoor lighting runs on standard household power. It shows up more often for hardwired wall sconces, some porch and entry fixtures, and brighter floods that need more punch. Those fixtures need outdoor-rated boxes, wet-location ratings and the right protection, and the wiring has to meet outdoor electrical rules.
A licensed electrician can look at your yard, the look you want and what’s already on the house, then recommend which approach fits. Transformers need a proper outdoor-rated power source, often on a GFCI-protected circuit. Fixtures should be listed for wet or damp locations. We don’t recommend DIY wiring for either system when it involves the panel, new outdoor circuits or buried hardwired runs. That’s where mistakes get expensive and unsafe.
Placement Tips That Actually Help
Brightness alone doesn’t make a yard look good or feel safe. Placement and aiming do most of the work:
- Light the path, not the sky. Aim fixtures down toward walks and steps. Glare shooting upward wastes light and washes out the night sky.
- Avoid glare into windows and neighbors’ yards. A spotlight pointed at a bedroom window or across the property line will make everyone unhappy. Shield or re-aim fixtures so light stays on your features.
- Highlight without over-lighting. One or two well-placed uplights on a tree or facade often look better than a dozen bright spots everywhere. Leave some shadow so the lit areas stand out.
- Space path lights evenly. Too far apart and you get dark gaps; too close and the walk looks like a runway. Follow the walk’s natural curves rather than a rigid grid.
- Mind the seasons. Trees leaf out, shrubs grow and holiday decorations change sight lines. Leave a little room to adjust fixtures later.
If you also want brighter coverage for a long driveway or the back of the property, our lighting installation and outdoor security lighting pages cover those options alongside softer landscape work.
Common Landscape Lighting Problems
Even a well-installed system can act up after a Georgia storm season or a few years of wear. These are the issues we see most often:
- Lights out after storms. Wind, water and debris can knock fixtures loose, trip protection or soak connections. Start by checking whether a GFCI or breaker has tripped before assuming every bulb failed.
- GFCI trips. Outdoor circuits are supposed to trip when moisture or a fault shows up. Repeated trips usually mean a wet connection, damaged cable or a failing fixture that needs diagnosis, not just a reset.
- Photocell or timer issues. Lights that stay on all day or never come on at night often have a covered, dirty or failing photocell, or a timer that lost its settings after an outage.
- Buried cable damage. Digging for plants, edging or fence posts can nick low-voltage cable. A section of the run goes dark while the rest still works.
- Corroded or loose fixtures. Outdoor stakes and connectors sit in soil and weather. Rust, cracked lenses and loose wire nuts are common after a few seasons.
When the problem isn’t a simple bulb or a tripped reset button, our electrical troubleshooting and repair team can track down the fault. If outdoor outlets for holiday displays or plug-in lights are part of the picture, see our guide on holiday lights and outdoor outlets and our new receptacle and wiring service.
When to Call a Licensed Electrician
Homeowners can swap a low-voltage bulb, wipe a lens or nudge a path light a few inches. Call a licensed electrician when the work involves power from the house:
- Adding a new outdoor circuit or a dedicated feed for a landscape lighting transformer
- Installing or relocating outdoor outlets for plug-in lights or seasonal displays
- Hardwired runs for wall lights, entry fixtures or line-voltage landscape fixtures
- Anything that means opening the electrical panel or tying into existing house circuits
- Repeated GFCI trips, scorched outlets, flickering across several fixtures or a burning smell
Outdoor electrical work has its own rules for weatherproof boxes, wet-location fixtures and GFCI protection. We don’t give DIY wiring or panel instructions. If you’re unsure whether a project is safe to tackle yourself, the safe answer is to call a licensed electrician and get a free estimate.
Landscape Lighting Across Our Service Area
Shocking Electric Solutions, Inc. has served Newnan-area homes since 2008 and holds a Georgia Class II Unrestricted Electrical Contractor license (EN216120). We design and install landscape and outdoor lighting in Newnan and about 40 miles around, including Peachtree City, Tyrone, Sharpsburg, Senoia, Carrollton and Riverdale. Same-day and next-day appointments are often available, estimates are free, and our work carries a 2-year warranty. Learn more about our Newnan electrician services and residential electrical services.
Ready for Safer Paths and Better Curb Appeal?
Call (678) 552-9399, or text (470) 516-7261. Many of our customers prefer texting, and our main line is a VOIP line that can’t receive texts, so please use the text number for messages. You can also email info@shockingelectricsolutions.com or visit us at 1002 Highway 16 W, Suite A, Newnan, GA 30263.
Electrical emergencies can happen anytime. If outdoor lights are sparking, smoking or smelling like they’re burning, call us. See our landscape lighting in Newnan page to get started.