Kitchen lighting installation by Shocking Electric Solutions in Newnan, GA

Lights Flickering in Newnan, GA

Circuit testing for flickering lights by Shocking Electric Solutions in Newnan, GA

If your lights are flickering, it’s more than an annoyance — it’s often a warning sign from your electrical system. Occasional flickering when a large appliance starts is normal, but repeated or persistent flickering usually points to loose wiring, overloaded circuits, a failing dimmer, an aging panel, or voltage instability that needs professional attention.

At Shocking Electric Solutions, our licensed electricians specialize in diagnosing and repairing lights flickering for Newnan homeowners. We identify whether the issue is a single fixture, a switch/dimmer problem, a branch circuit, or a larger panel/service concern — and provide a safe, lasting fix.

Common Causes of Lights Flickering in Newnan

Flickering lights can stem from several different issues. Here are the most frequent causes we see:

  • Loose wiring connections in switches, fixtures, or the panel
  • Overloaded circuits from high-draw appliances
  • Worn or incompatible dimmers with LED lighting
  • Failing or aging electrical panel components
  • Damaged wiring or poor neutral connections
  • Faulty light fixtures or LED drivers
  • Utility voltage fluctuations (less common)

Because the symptom looks the same at the light, proper testing is essential to find the real source.

Loose Wiring Connections

One of the most common reasons for flickering lights is a loose electrical connection. Wires can loosen over time due to thermal expansion, vibration, or age. A poor connection creates resistance that causes voltage drops and visible flickering, especially under load.

This issue can occur at the switch, fixture box, junction, or even inside the panel. Loose connections also generate heat and can lead to arcing if left unaddressed.

Overloaded Circuits

When too many devices run on the same circuit, voltage can dip momentarily when a high-draw appliance (microwave, hair dryer, AC unit, etc.) starts. This often causes lights to flicker or dim briefly.

In older Newnan homes, circuits that were adequate years ago may now be overloaded by modern appliances and electronics.

Incompatible Dimmers and LED Lighting

Many homes upgraded to LED bulbs but kept older dimmers. This mismatch frequently causes flickering, especially at low brightness levels. Some dimmers are not designed for the low wattage of LEDs and create unstable operation.

Replacing the dimmer with an LED-compatible model often solves the problem quickly.

Electrical Panel Issues

An aging or overloaded panel can cause system-wide instability that shows up as flickering lights. Loose bus connections, weak breakers, or outdated equipment struggle to deliver consistent voltage under modern demands.

Learn more about electrical panel upgrades in Newnan

Related Electrical Issues We Commonly Fix

If you’re experiencing similar problems, these pages may help:

Warning Signs That Require Immediate Attention

Call a licensed electrician right away if lights flickering is combined with:

  • Burning smells or warm switch/fixture plates
  • Buzzing or crackling sounds
  • Flickering that is getting worse or more frequent
  • Breakers tripping or lights dimming dramatically
  • Flickering across multiple rooms or when large appliances start

Warning Signs to Call About

Call a licensed electrician when flickering lights come with any of these signs:

  • Flickering in more than one room, or throughout the house
  • Lights that dim or flicker when an appliance such as the air conditioner, dryer or microwave starts
  • Buzzing, crackling or a burning smell from a light, switch, outlet or panel
  • A switch or fixture that feels warm
  • Flickering that keeps getting worse, or comes with a breaker that trips

Flickering can come from a loose connection, a failing dimmer or fixture, or a problem at the panel, and it is not something to live with. A licensed electrician should check and fix it.

One Light or the Whole House?

Where the flicker happens tells us a lot. A single fixture that flickers usually points to a bulb, a loose bulb socket, a dimmer that does not match LED bulbs or a loose connection at the switch or fixture. Several rooms flickering together, or lights that dim when a large appliance starts, points to the circuit, the panel or the service coming into the home.

Whole-house flicker can also come from a loose neutral connection, which can damage electronics and appliances. If lights get brighter in one room while they dim in another, stop using sensitive equipment and call us right away.

What We Check

  • Bulbs, sockets and dimmer compatibility with LED lighting
  • Switch and fixture connections
  • Breaker and panel connections
  • Voltage on the circuit and at the panel under load
  • Neutral and grounding connections

For more detail, read Flickering Lights? Warning Signs and When to Call an Electrician and why LED lights flicker or buzz on a dimmer.

Professional Lights Flickering Troubleshooting in Newnan

Our licensed electricians perform voltage testing, circuit load analysis, switch and dimmer checks, fixture evaluation, and panel inspection. We isolate the exact cause and make the correct repair — whether that’s tightening connections, replacing a dimmer, fixing wiring, or recommending panel improvements.

Learn more about our electrical troubleshooting services

Serving Newnan and Surrounding Areas

Shocking Electric Solutions proudly serves Newnan and nearby communities including Peachtree City, Sharpsburg, Senoia, Tyrone, Fayetteville, Palmetto, and Grantville.

View our full service areas

Lights Flickering in Newnan?

Don’t ignore persistent flickering lights — it can indicate loose wiring, overload, or panel issues. Contact our trusted local electricians for fast, professional diagnosis and repair.

Schedule Electrical Service Now

Or call us directly at (678) 552-9399.

Shocking Electric Solutions, your Newnan, GA electrician to learn more about our licensed electrical services.

Related Reading

More guides from our Newnan electricians on this topic:

Frequently Asked Questions

Is lights flickering dangerous?

It can be. Persistent flickering often signals loose connections, arcing, or overload that may lead to overheating or fire if ignored.

Can LED bulbs cause flickering?

Yes — especially with older dimmers not designed for LEDs. Replacing the dimmer with an LED-compatible model usually fixes it.

Why do my lights flicker when the AC or microwave starts?

This is usually a sign of voltage drop from an overloaded circuit or weak panel/breaker. It should be evaluated to prevent bigger issues.

Why do my lights flicker in only one room?

A loose bulb, a dimmer that is not rated for LEDs or a loose connection at the switch or fixture are common causes. If it continues after a bulb change, have it checked.

Should I call the power company or an electrician?

If neighbors have flickering too, the problem may be on the utility side, so contact your power company. If it is only your home, call a licensed electrician to check your panel and wiring.

Can flickering lights mean a loose neutral?

Yes. Lights that get brighter and dimmer across different rooms can point to a loose neutral, which needs prompt attention.

Are estimates free?

Yes. Call (678) 552-9399 or text (470) 516-7261 to set up a free estimate.

Contact Shocking Electric Solutions